Smiss Emili Clearomizer
The Emili Clearomizers come ready to fill with your favoruite e-liquid flavour. Simply unscrew the base and fill the clearomizer then screw the base back on and its ready to go. It's recommended that you use a needle tip bottle as the fill area is narrow. Using a e-liquid bottle that has a dropper may make it more difficult to fill the clearomizer. The Emili Clearomizers are perfect if you want to have a few different flavours on the go. They are also reusable, you can refill and replace the atomizer to make it brand new!
The Emili Clearomizers are ONLY compatible with Emili Pocket Vape Starter Kit.
1 x Emili Clearomizer
Important: Priming your coils is one of the most important steps before using a new tank/clearomizer and a new coil/atomizer. Priming your coil ensures you won't burn your coil before taking a hit. It also makes sure that the coil lasts as long as possible.
Step 1. Drop e-liquid in the center of the coil ensuring the juice is soaked up by the cotton and let it slide down so it hits the cotton and wire. Repeat this process on the wick holes on the side of the coil. The juice will soak the cotton and this will ensure that you won't experience a dry hit.
Step 2. Attach your tank and fill with e-liquid then leave it to stand for a minute or two, so that the juice in the tank gets soaked up by the coil/atomizer too.
Step 3. After you have primed the coil and let it sit for a few minutes you should fire your device below the recommended wattage and slowly increase in smaller intervals to ensure your atomizer does not burn out right away. It's recommended that you don't fire your device at maximum recommended wattage until you've puffed on it approximately 10 times.
|Coil/Wire Type||Cotton, Kanthal|
|Draw Type||Mouth To Lung (MTL)|
|Tank Base Diameter||510-T|
|Airflow and Filling Method||Bottom Fill, Bottom Airflow|