Aspire K1

The Aspire K1 is one of the latest glass clearomizer by Aspire.  The K1 uses the same bottom vertical coil (BVC) technology as the Aspire Nautilus series tanks but in a smaller coil design.  A BVC technology provides a thicker, richer vapour which in turn promotes better flavour. The K1 tank has 1.5ml of e-liquid capacity and is recommended for those looking for a mouth to lung (MTL) vape which is commonly associated with how a cigarette is smoked. The K1 is the perfect upgrade for an EGO Twist Starter Kit as it is made of Pyrex Glass and stainless steel making it more durable than the plastic clearomizer. 

Included:

Specifications:

-Pyrex glass tank
-BVC (Bottom Vertical Coil) technology
-Stainless steel drip tip
-Length = 72mm x 14.5mm
-Coil resistance = 1.8ohm (10-13W)
-Capacity = 1.5ml
-Compatibilty : EGO threaded batteries

Important: Priming your coils is one of the most important steps before using a new tank/clearomizer and a new coil/atomizer. Priming your coil ensures you won't burn your coil before taking a hit. It also makes sure that the coil lasts as long as possible.

Step 1. Drop e-liquid in the center of the coil ensuring the juice is soaked up by the cotton and let it slide down so it hits the cotton and wire. Repeat this process on the wick holes on the side of the coil. The juice will soak the cotton and this will ensure that you won't experience a dry hit.

Step 2. Attach your tank and fill with e-liquid then leave it to stand for a minute or two, so that the juice in the tank gets soaked up by the coil/atomizer too.

Step 3. After you have primed the coil and let it sit for a few minutes you should fire your device below the recommended wattage and slowly increase in smaller intervals to ensure your atomizer does not burn out right away. It's recommended that you don't fire your device at maximum recommended wattage until you've puffed on it approximately 10 times.