Vaporesso Target Mini 2 Kit
NEW AND IMPROVED, Vaporesso has breathed life once again back into the Vaporesso Target Mini Kit and has brought us the Vaporesso Target Mini 2. With a new improved sleek design, the device has given it a premium metallic finish with the same ergonomic shape that everyone loves. Not only upgrading the exterior, the device is now fitted with a 2000mah battery that will fire up to 50w of power with quick charging that will support up to 2A fast charging with the support of its new OMNI 4.2 chipset.
With a new mod comes a new tank! The Vaporesso Target Mini 2 Kit provides you with the Vaporesso VM Tank with a diameter of 22mm but with a tank capacity of 2ml of e-liquid. Sticking to its roots, Vaporesso provides us with the new EUC CCELL ceramic coils which are perfect for e-liquids or CBD oils. For the cloud chasers they have released the new EUC Meshed Tea Fiber coil, replacing our standard cotton with tea fiber. This provides an even soak around the coil and will provide thick, flavorful clouds combined with the mesh coil built inside.
For those looking for the best flavor and vapor production from a portable internal battery box mod, don't look any further as the Vaporesso Target Mini 2 Kit will provide and some more.
- VM Tank 22 Adapted
- 2000mah Battery
- 2A Quick Charge
- EUC CCELL Coil
- OMNI 4.2 Built-In
- Kit Dimensions: 107.1mm (H) x 25.7mm (W) x 37.2mm (D)
- Tank Capacity: 2ml
- Battery Capacity: 2000mAh
- Display: 0.66" OLED
- Power Range: 5w-50w
- Resistance Range: 0.03~5Ω
Important: Priming your coils is one of the most important steps before using a new tank/clearomizer and a new coil/atomizer. Priming your coil ensures you won't burn your coil before taking a hit. It also makes sure that the coil lasts as long as possible. For Ceramic Coils the process is very similar however they require a longer to saturate before you take your first puff.
Step 1. Drop e-liquid in the center of the coil ensuring the juice is soaked up by the cotton and let it slide down so it hits the wire. Repeat this process on the wick holes on the side of the coil. The juice will soak the cotton and this will ensure that you won't experience a dry hit.
Step 2. Attach your tank and fill with e-liquid then leave it to stand for a 20-30 minutes, so that the juice in the tank gets soaked up by the coil/atomizer too.
Step 3. After you have primed the coil and let it sit for a few minutes you should fire your device below the recommended wattage and slowly increase in smaller intervals to ensure your atomizer does not burn out right away. It's recommended that you don't fire your device at maximum recommended wattage until you've puffed on it approximately 10 times.
|Battery Specs||Mod, Built-in Battery|
|Charging Style||Micro USB Cable, Passthrough|
|Draw Type||Direct Lung (DL), Mouth To Lung (MTL), Sub Ohm|