Vaporesso Target PRO Kit

Vaporesso Target PRO Kit

  • Earn 50 Points Every $20 Spent
    1000 points = $10.00 savings instore and online
    1000 points = $20.00 DOUBLE savings on any e juice!

Login to earn Reward Points for sharing!
Vaporesso Target Mini Kit

Vaporesso Target Mini Kit

Smok GX 2/4

Smok GX 2/4

Vaporesso Target PRO Kit

As low as CA$99.99 Earn up to 427 Reward Points

In stock

Vaporesso Target PRO Kit
Customize Vaporesso Target PRO Kit

* Required Fields

Your Customization
Vaporesso Target PRO Kit
Vaporesso Target PRO Kit

In stock

CA$99.99 Earn up to 250 Reward Points


    The Vaporesso's Target Pro 75W TC Kit is a stunner. It's flawless in not only its design but also when it comes performance. It's agronomical design resembles a joystick so it fits comfortably in your hand. The Target Pro 75W TC is a 75 watt device that is constructed with high-grade Zinc-Aluminum alloy making it highly resistant to corrosion, rust and make it a light weight device. The Target Pro supports temperature control modes that are compatible with Nickel (Ni), Titanium (Ti) and Stainless Steel 316 wire (SS316) and has Temperature Coefficient of Resistance (TCR). It features a high-quality OLED screen that displays the wattage, output voltage, temperature setting, atomizer resistance, battery life and duration of your puff.  This information is helpful to vapers looking to find their ideal setting. The Target Pro also has a durable stainless steel 510 thread connector that has 24K gold plated contact pin to provide superior conductivity. The contact pin is spring-loaded and self-adjusting to ensure a secure connection between the mod and the tank.

    The Target Pro 75W requires (1) high amp 18650 battery and also has an on board charging port so you can easily recharge device with a micro USB charger.

    It also has upgradable firmware for customized configuration.

    The Target Pro Tank has a top filling system for easy and convenient refilling and holds 2.5ml of e-liquid. The tank itself is constructed with 304-grade Stainless Steel and when connected to the Target Pro mod's 24k gold contact pin provides increased electrical conductivity. It also has high-quality Pyrex glass that is heat treated and is capable of handling high temperatures without cracking. The Target Pro Tank has a dual airflow adjustment valve that allows you to customize your vapor production for an airier or tighter hit by rotating the valve.  To eliminate leaks through the airflow valve it has been design with enhanced seals.

    A huge selling point for the Target Pro Tank are its ceramic coils. Most traditional coils use cotton however the ceramic eliminates wicks altogether. The coils have 12-micron porous ceramic material that surround the entire coil. This evenly distributes the e-liquid throughout the entire coil and produces massive clouds with pure flavour. By eliminating wicking material you avoid clogs and dry hits. These features allow for a longer life span on the coil compared to traditional coils.


    1 x Target Pro 75W Box Mod by Vaporesso
    1 x Target Tank (0.9Ω cCell Kanthal Coil Pre Installed)
    1 x Target Pro Tank 0.2Ω cCell Ni200
    1 x Micro USB Cable
    1 x User Manual

    Target Pro Mod Features & Specs:

    -Dimensions: 92*48*27mm
    -Wattage Range: 5W - 75W W/TC (Ni, SS, Ti TCR)
    -Temperature Range: 300°F - 600°F / 150°C - 315°C
    -Suitable Atomizer: 0.15Ω And Above
    -Requires (1) 18650 Battery (Batteries Sold Separately)
    -Spring Loaded 18650 Positive Battery Connection 
    -Micro USB Charging Port
    -Magnetic Battery Panel
    -Ergonomic Design
    -OLED Display
    -510 Threaded
    -Gold Plated 510 Contact
    -Spring Loaded 510 Contact

    Target Pro Tank Features & Specs:

    -Tank Dimensions: 22*62mm
    -Delrin Drip Tip
    -Pyrex Glass Tank
    -3.5mL Tank Capacity
    -Heat Sink 510 Drip Tip Connection
    -Gold Plated 510 Contact
    -Adjustable Airflow
    -cCELL Coils (Ceramic Coils)
    -Gold Plated Coils

    Important: Priming your coils is one of the most important steps before using a new tank/clearomizer and a new coil/atomizer. Priming your coil ensures you won't burn your coil before taking a hit. It also makes sure that the coil lasts as long as possible. For Ceramic Coils the process is very similar however they require a longer to saturate before you take your first puff.

    Step 1. Drop e-liquid in the center of the coil ensuring the juice is soaked up by the cotton and let it slide down so it hits the wire. Repeat this process on the wick holes on the side of the coil. The juice will soak the cotton and this will ensure that you won't experience a dry hit.

    Step 2. Attach your tank and fill with e-liquid then leave it to stand for a 20-30 minutes, so that the juice in the tank gets soaked up by the coil/atomizer too.

    Step 3. After you have primed the coil and let it sit for a few minutes you should fire your device below the recommended wattage and slowly increase in smaller intervals to ensure your atomizer does not burn out right away. It's recommended that you don't fire your device at maximum recommended wattage until you've puffed on it approximately 10 times.



    More Information
    Strength N/A
    Brand Vaporesso
    Colour N/A
    Battery Specs Mod, Removable Battery, 18650
    Charging Style Micro USB Cable, Passthrough, External
    Watts/Temp 40w-85w
    Device Style Mod
    Draw Type N/A
    Write Your Own Review
    You're reviewing:Vaporesso Target PRO Kit
    Your Rating